Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

1135 Hydraulics

Welcome Guest, Log in or Register
Author  [Modern View]
kaladiyl

08-15-2011 15:54:53




Report to Moderator

I have a 1974 massey 1135, it only has 2 hydraulics on it and i would like to add one for grapple fork on loader. currently I am using an open center 2 spool block plugged into one of the hydraulics to split it to 2. What would be the easiest way to do that, is there a way to plump in an open center block into it or do I need to get a closed center block and tee off the incoming to the original hydraulics ?
Pete

[Log in to Reply]   [No Email]
BenAlbert

08-15-2011 18:23:46




Report to Moderator
 Re: 1135 Hydraulics in reply to kaladiyl, 08-15-2011 15:54:53  
The easiest thing is to use a closed center valve. There is a pressure line that runs up near the right side of the rock shaft. You can put in a T, and find a return to the sump. You can then run your pressure to as many valves as you want. The one I did I used Gresen electric operated valve so I only had to run wires up into the cab for switches. Its been a while and I no longer have the tractor, so I don't quite remember where I hooked every thing up.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy