Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

135 transmission leak.

Welcome Guest, Log in or Register
Author  [Modern View]
lewistg

04-25-2010 13:55:54




Report to Moderator

I've been working on my 135, that has a transmission leak into the bellhousing. I have found no obvious culprits to the leak, so... I am replacing all the seals and bushings in the area. I saw some sealing rings on the input shaft. Could they possibly had caused it to leak and should I go ahead and replace them?




[Log in to Reply]   [No Email]
lewistg

04-29-2010 18:01:22




Report to Moderator
 Re: 135 transmission leak. in reply to vinnywv, 04-25-2010 13:55:54  

300winchester said: (quoted from post at 19:40:15 04/28/10) If the main input shaft has any groove that you can catch a knife blade, your fingernail on, etc, it is shot, I just replaced mine, have to take apart the whole transmission to pull it out the back, shaft was $210 plus steel sealing rings and rubbers seals.
where on the shaft was yours worn?

[Log in to Reply]  [No Email]
lewistg

04-25-2010 14:14:56




Report to Moderator
 Re: 135 transmission leak. in reply to Leslie R Robb, 04-25-2010 13:55:54  

welding man said: (quoted from post at 22:11:45 04/25/10) Sealing rings? Does this tractor have Multi-power?


yes it has mulitpower.



[Log in to Reply]  [No Email]
welding man

04-25-2010 14:11:45




Report to Moderator
 Re: 135 transmission leak. in reply to lewistg, 04-25-2010 13:55:54  
Sealing rings? Does this tractor have Multi-power?



[Log in to Reply]  [No Email]
welding man

04-25-2010 16:08:17




Report to Moderator
 Re: 135 transmission leak. in reply to welding man, 04-25-2010 14:11:45  
The seal rings only seal the presurized oil going to the clutch pack.If the rings are not broken or excessively worn, they should be OK The transmission input shaft seals keeps the oil in the transmission. There is a gasket on the input shaft housing, and you could have a leak on the multi-power control valve or lines.



[Log in to Reply]  [No Email]
300winchester

04-28-2010 11:40:15




Report to Moderator
 Re: 135 transmission leak. in reply to welding man, 04-25-2010 16:08:17  
If the main input shaft has any groove that you can catch a knife blade, your fingernail on, etc, it is shot, I just replaced mine, have to take apart the whole transmission to pull it out the back, shaft was $210 plus steel sealing rings and rubbers seals.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy