The 830 I have is serial #118388L, name plate shows it was made in Germany. I purchased this several years ago with a loader on it. The loader only works well with a load on the 3 pt. hitch. Without a load on the hitch the loader just operates in small, jumpy increments. There is a manual valve that allows flow to the loader. The three point will not operate when the valve is open. The three point works fine with the valve closed. I have shown some photos to try and clarify the above. Are there changes I could make so I wouldn't have to carry something around on the 3 point hitch / Thank you.[/img:c0ecb34e95]
[img:c0ecb34e95]https://forums.yesterdaystractors.com/photos/mvphoto105863.jpg
[img:c0ecb34e95]https://forums.yesterdaystractors.com/photos/mvphoto105863.jpg