seal cross ref.

Mike(NEOhio)

Well-known Member
Location
Newbury, Ohio
Can anybody give me the oil seal number for the governor shaft on an H with the hydraulic pump. H829R and it doesn't show up in any interchange that I can find.
 

cvphoto152581.png
 
As Rodney52Cub mentioned, a CR (SKF) 6741 has the correct ID/OD, but it is narrower (0.250 vs the original 0.365 approx.) and is of a different construction that the original H829R, but should work properly if you're careful during installation.
 
Thanks all. I was looking in National and Timken crosses and that number is not listed. I looked on JD parts online and I was also searching for the camshaft seal which is not listed there. Got them mixed up.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top