4440 Battery Cable

Gary Puckett · Apr 8, 2023

I have not studied the situation in depth, but can the positive to negative battery cable (the long one) be installed on a 4440 without removing several components? In other words, can you fish it through? Thanks

LonM · Apr 8, 2023

Yes, you should be able to get the new cable in okay. You could tie a piece of twine or wire to the old one so that you can guide the new one in easier. I have done that on our 4240- a 4440 cab sits up higher, so you should have more room. My 4640 has a lot more space between the cab and transmission housing than the 4240 does. However, the parts book for a 4440 shows a cable clamp that fastens that cross cable, which could slow the job down.

Lon

620 John · Apr 8, 2023

Roll back the floor mat a little bit and take the floor pan out from under the clutch and brake pedals. Then replacing the cable is pretty easy.

Gary Puckett · Apr 9, 2023

Thanks. I was hoping that would be the case.

Gary Puckett · Apr 9, 2023

Thank you for that information. I saw that clamp in the parts digram.

4440 Battery Cable

Gary Puckett

Member

LonM

Member

620 John

Member

Gary Puckett

Member

Gary Puckett

Member

Similar threads