(800) 853-2651
SHOP NOW

40S, 420S, 430S Cultivators

C

ChrisInPA

New User
I'm trying to clear up some conflicting information I found in my files:

PC288 on page 1 indicates the 4100 cultivator will fit the 40S, 320S, and 420S from 1953-1958.

PC288 also states on page 1 the 4110 is for the 330, 430, 320, and 40 standard tractors manufactured 1958-1960.

Older issues of Two-Cylinder and The Review indicate the 4100 worked with the 40 through the 430 Standard, but the only pictures of 430 standards I've seen have the 4110 mounted.

I recently became interested in this series of tractors and have acquired neither the tractor or cultivators yet, but have found examples of the 40S-420S-430S tractors and 4100 cultivators separately to look at and want to make sure I know what I'm getting into. Will the 4100 work the 430S?

Thanks.
Chris
 
The only difference between a late 420 and 430 is the sheet metal. So I see no reason why the 4100 unit won't fit on a 430. I bought a 430S several years ago with the 4110
cultivators on it. Was able to remove them and mount them on a 330S by just changing a few brackets around. I know this doesn't quite answer your question but I'm sure the units will
work together.
 

I suspected the 4100's would fit on a 430, but I guess the lift mechanism was my concern. The set of 4100's I found have lift pipes. The 430's I've seen look like the Touch-o-matic is setup for the cable lift. The few slant steer 420's I've seen appear to have the Touch-o-matic set up for the cable too, while the older 420's and 40's have the lift arms for the pipes.

Am I correct in my interpretation that the slant steer 420 and 430 must have the cable lift? If so, that could make finding all the pieces more difficult if I go that route.

Thanks!
Chris
 
You must log in or register to reply here.

Similar threads

L
Bryce Frazer, Mower
Replies
1
Views
481
Bryce Frazier
B
J
picked up an interesting manual
Replies
3
Views
666
jdhbag
J
L
High-speed tractors
Replies
3
Views
1K
IH fan
I
L
Whats Your Opinion ? Non-Detergent oil Lead Substitute
2
Replies
30
Views
10K
Hobo,NC
Hobo,NC
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top