Dreaming Green IN
Member
The steering motor on my 3020 is leaking. A stream comes from the vent tube when turning the steering wheel.
I have a service manual. Pic below shows the parts. I presume it needs O-rings on the pistons, but does the spindle need to come out, too? And I presume that the front axle must be dropped to access the motor? Sounds like a big job. Yes?
The tractor is a 1964 3020 Diesel with PowerShift, serial number 59255.
[/img:d2078f4755]
I have a service manual. Pic below shows the parts. I presume it needs O-rings on the pistons, but does the spindle need to come out, too? And I presume that the front axle must be dropped to access the motor? Sounds like a big job. Yes?
The tractor is a 1964 3020 Diesel with PowerShift, serial number 59255.
[/img:d2078f4755]