(800) 853-2651
SHOP NOW

Deere 2510 won't move

S

stevetherentalman

New User
Hello Everyone,
I'm a new member and excited. I have a 2510 Diesel Syncro tractor. Bought it after sitting for a few years. Got it home and drove it off the trailer. Got into servicing it and all of a sudden I have no movement when I put it in gear. Shifter moves freely and will go into all gears but when I let off the clutch, Nothing. I also don't have any hydraulics on the 3 point, no power steering. Its got new oil and filters all around. Pulled off the rear transmission cover at the floor board and under the seat and nothing looks out of place and everything moves when shifting.

Any advice as to what to check next? I'm coming up with a plan to split it but need to know what to check once she's split.

Thanks!
 
(quoted from post at 13:35:41 10/05/22) My first thought is clutch but you should still have hyds and steering. I am thinking clutch shaft maybe? Tom
Click to expand...

Isn't trans pump driven from top shaft in trans? If so if clutch isn't powering input shaft trans pump gears wouldn't turn to pump oil
 
Years ago we broke the center hub out of the clutch disc on our 4020. I was chopping hay and had one more windrow to chop. Tractor would not
move but pto and all hyd's worked fine. We hooked another tractor to the front of it and towed it around the field to finish chopping as I did
not want to have to change the controls on the chopper to a different tractor. His problem is either clutch shaft or disc. He will need to
split it either way. He might see something by removing the clutch cover and looking in with a light and a small mirror. Tom
 
First off thanks for all the replies. I really appreciate it.

Got her split in a unconventional way but she s split. Here s what I found. Anything look wrong ? Clutch pack getting taken apart tonight.
[video play=false:4ff3c65c86]https://forums.yesterdaystractors.com/videos/mvvideo98263.mov[/video:4ff3c65c86]

[video play=false:4ff3c65c86]https://forums.yesterdaystractors.com/videos/mvvideo98264.mov[/video:4ff3c65c86]


This post was edited by stevetherentalman on 10/10/2022 at 11:55 am.
 
You must log in or register to reply here.

Similar threads

L
2510 FEL options
Replies
7
Views
413
FWB in SK
F
T
John Deere 2510 diesel
Replies
12
Views
658
Fixingfarmer
Fixingfarmer
A
John deere 2510
Replies
8
Views
424
Jim.ME
J
A
TO30 Gears do not move when shifting
Replies
9
Views
302
AllanK
A
L
1966 John Deere 2510 jittery Hydraulics
Replies
15
Views
794
Harry in Ky
H
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top