DLTX-10 carb float settings

nashranch · Feb 5, 2021

Messing with the bowl and float on my 35 B DLTX-10. The float shuts off fuel way to early i think looking at mine. There must be a setting from top of float to top of bowl. Tried to PM Randy Brickner but that has been disabled.

Mike M · Feb 5, 2021

1/2" from the edge of bowl gasket surface to the top of the float. Easier to do with the bowl off and turned upside down. Check float for a leak too.

Jim.ME · Feb 5, 2021

This manual should have the info you need.

https://www.carburetor-parts.com/assets/manuals/marvel-schebler-manual.pdf

nashranch · Feb 5, 2021

(quoted from post at 11:30:56 02/05/21)
This manual should have the info you need.

https://www.carburetor-parts.com/assets/manuals/marvel-schebler-manual.pdf

Thanks Jim for that link to the Carb info

Earl-IL · Feb 6, 2021

Before I go bending around on the float I look for a thinner or thicker gasket that goes under the seat.

DLTX-10 carb float settings

nashranch

Well-known Member

Mike M

Well-known Member

Jim.ME

Well-known Member

nashranch

Well-known Member

Earl-IL

Well-known Member

Similar threads