Bleeding a 310 Back hoe

J. Schwiebert · Dec 31, 2020

Easiest way to get to the injectors to bleed them? Thanks. J.

Jim.ME · Dec 31, 2020

(quoted from post at 12:29:20 12/31/20) Easiest way to get to the injectors to bleed them? Thanks. J.

Boom up with the safety prop in place helps. If it was run out of fuel, and the boom is down, I don't think there is an "easiest way".

tim s · Dec 31, 2020

They don't need bled,,,start it up and run it,, if anything crack the pressure supply line at the pump a bit..but leave the injector lines alone..

Roy Suomi · Jan 1, 2021

Most will bleed themselves. Some do need to be bled by opening up injector line fittings at the injectors. If that doesn't work, check for adequate fuel flow at the bottom of the fuel tank.. Sometimes there will be crap stuck in the shut off valve..

Bleeding a 310 Back hoe

J. Schwiebert

Well-known Member

Jim.ME

Well-known Member

tim s

Well-known Member

Roy Suomi

Well-known Member

Similar threads