Bale Trak Plus monitor fubar?

BarnyardEngineering · Aug 1, 2020

I Was baling along when suddenly all the icons and digits on my bale trak plus monitor lit up and it started beeping. It would not shut off with the on off switch. I had to disconnect power. When I plug it back in it is off. When I hit the on button the entire screen lights up again and it is totally unresponsive. I have to disconnect power again.

My guess is it failed. Any suggestions?

Tx Jim · Aug 1, 2020

I agree it sounds as if monitor died. I suggest with tractor engine running to check battery voltage on monitor supply wiring harness.

dairyman · Aug 1, 2020

Ag express does a good job rebuilding electronics, google
them and contact the facility nearest you.

BarnyardEngineering · Aug 3, 2020

Thanks for the recommendation to Ag Express. I'll check them out.

New development, the monitor won't power up at all now and there's a smell of electronic death.

jsborn · Aug 4, 2020

(quoted from post at 07:29:28 08/03/20) Thanks for the recommendation to Ag Express. I'll check them out.

New development, the monitor won't power up at all now and there's a smell of electronic death.

Those things run on Smoke. When the Smoke leaks out they will stop running and need expert repair. Just Saying !

Bale Trak Plus monitor fubar?

BarnyardEngineering

Well-known Member

Tx Jim

Well-known Member

dairyman

Member

BarnyardEngineering

Well-known Member

jsborn

Member

Similar threads