Re: Help with G Flywheel Wrenches

David from Kansas · Jul 24, 2020

Why not get the correct wrench? These are the only two styles of flywheel wrench I have seen for the JD two cylinders. Notice that
one has a greater offset than the other. I was told years ago by a person of authority (???) that the one with the greater offset
was for the model G tractor, due to having a larger flywheel, of slightly different design, I don't remember. Since I don't have a
model G I would sell the wrench for $50 plus shipping which would be about $11. Just a suggestion.

Dan in Ohio · Jul 24, 2020

I too have two wrenches that are slightly different acquired during my auction addiction phase. Don’t know what they are made for. My experience with old JD wrenches has not been good as fifty years of rust on bolts tends to defeat them. Worth a try if you can find one.

Loosehandle · Jul 24, 2020

16" extension, first bend as close to
socket end as possible 4" offset. A
imported one is fine.

Dan in Ohio · Aug 1, 2020

Can you print the pics you where given? Sounds crazy but it works, try it.

Re: Help with G Flywheel Wrenches

David from Kansas

Well-known Member

Dan in Ohio

Well-known Member

Loosehandle

Well-known Member

Dan in Ohio

Well-known Member

Similar threads