[email protected]

James Howell · May 28, 2020

"[b:654c4848f0][i:654c4848f0]I can not find tie rod ends for a 40 standard. Where can you get them.[/i:654c4848f0][/b:654c4848f0]"

Details about <a href="https://www.ebay.com/itm/AM3951T-Tractor-Tie-Rod-Outer-John-Deere-320-330-40-420-430-1010/272001163473?hash=item3f548860d1:g:-csAAOSwKIpWCum3">AM3951T Tractor Tie Rod Outer John Deere 320 330 40 420 430 1010</a>

Details about <a href="https://www.ebay.com/itm/AM496T-Tractor-Tie-Rod-Inner-John-Deere-320-330-40-420-430-M-1010/281030775255?epid=1056005936&hash=item416ebd51d7:g:EEEAAOxy7rdRFI~h">AM496T Tractor Tie Rod Inner John Deere 320 330 40 420 430 M 1010</a>

"[b:654c4848f0][i:654c4848f0]Will the 40 work for the 40-S[/i:654c4848f0][/b:654c4848f0]"

No.

Hope this helps.

Tx Jim · May 28, 2020

Inspect the top of this page where it's states "John Deere" under Tractor Parts. The nice owners of this discussion forum sell tractor parts.

Hayfarmer · May 28, 2020

Probably 15 years ago I inquired at the John Deere dealer about outer tie rod end for my 430 U. They were $85 each. Since my tractor is a worker not a shower I made new tie rods from some jeep ones I had around, found out the tapered ends were the same size. I think the inner tie rod ends are the same for various configurations, S,W U etc but outer ones are different. You can find inner tie rod end really cheap. I use a loader on my tractor so the heavier jeep tie rods have worked good. I assume 40 is similar

[email protected]

James Howell

Well-known Member

Tx Jim

Well-known Member

Hayfarmer

Well-known Member

Similar threads