Good morning all! Looking for help with my 1969 John Deere
300 industrial with gas engine. Was having carb problems so I
took the carb off and cleaned it. Replaced all gaskets and
used compressed air to blow out all jets. Carb is a TSX-
904SL. After reinstalling carb the tractor fired up and idles
great! However, I cannot bring tractor up to high speed unless
the choke is on. I adjusted idle needle & load needle. Neither
adjustments seem to make a difference, choke must be on to
reach high speed. Any thoughts, ideas, tips???
300 industrial with gas engine. Was having carb problems so I
took the carb off and cleaned it. Replaced all gaskets and
used compressed air to blow out all jets. Carb is a TSX-
904SL. After reinstalling carb the tractor fired up and idles
great! However, I cannot bring tractor up to high speed unless
the choke is on. I adjusted idle needle & load needle. Neither
adjustments seem to make a difference, choke must be on to
reach high speed. Any thoughts, ideas, tips???