BleedkyBlue
Member
Ordered new gauge and sender. Installed both, gauge has 3 studs for connections vs old one with two.
Have validated wire to sender, sender works, but gauge constantly wants to go to full when key turned on.
Not wiring something right, just can t figure it out. I ordered a positive ground gauge. It s a 24v system, 1964 model.
Markings on the back of the 3 post aren t aligned real well, positive ground, ground and supply voltage.
Any help would be appreciated.
Have validated wire to sender, sender works, but gauge constantly wants to go to full when key turned on.
Not wiring something right, just can t figure it out. I ordered a positive ground gauge. It s a 24v system, 1964 model.
Markings on the back of the 3 post aren t aligned real well, positive ground, ground and supply voltage.
Any help would be appreciated.