Couple pics of the finished product. Fit under hood is very good. The fresh air line from filter to turbo is the biggest challenge. Exhaust fits original opening in hood perfectly. I think I will put on a K&N type filter that will connect directly to turbo intake and fit under the hood and between the cowl. I drove it a couple miles to bring it up to temp. It?s been several years since we had a 4430 but sound and feel reminded me of it for sure. Going to be a lot of fun. Big thanks to Tim S for helping me out w the parts as well as tips for installation.
- Thread starter JDJim
- Start date
Nice looking tractor......great job. I never thought about using the weights as a step..
Father in law got tired of his muffler on his case 1370 rusting out every few years, so he made one out of stainless. The muffler is with my son in law now, but I'm betting the muffler outlives the tractor. Just wondered if you could make one to fill the whole in your hood??
Again....Great looking tractor!
Ya we didn?t plan on the weights being the step. It just worked out that way. Even when weights are off the bracket is a handy step. The original hole in the hood is fine w a 4 in pipe coming out of it. The whole point was to not cut it up. Thanks for the comments. This tractor has been on this place since I was young. Kinda grew up with it. Now it?s my sons project. Lots of fun.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy