3020

McGuyver · Mar 17, 2019

Another hydraulic question. I have a 64 3020 & 148 loader.
Would anyone recomend a close center joystick from under
$250.00. Also hiw many gpm? I read that the 3020 puts out 6
gpm at the remote & 14 gpm total. So on a direct replumb
would that be 14 gpm? Thanks in advance

SVcummins · Mar 17, 2019

3020 is 18 gallon per minute

SVcummins · Mar 17, 2019

6 to 7 gpm at the breakaway coupler with the engine at 800 rpm . So I don?t know what the flow will be at the point where you tie the valve in but I bet somebody does

Tx Jim · Mar 18, 2019

Here's 1 valve that will work. You'll need the CC plug & seals outlined in yellow circle

John Eatwell · Mar 18, 2019

I put that same exact valve on a 4010 with a loader, works great. I plumbed it into the hydraulic valve on back, has plenty of flow. Would recommend that valve for you to use. I bought it from the company shown in the picture, good people to work with. John

3020

McGuyver

New User

SVcummins

Well-known Member

SVcummins

Well-known Member

Tx Jim

Well-known Member

John Eatwell

Member

Similar threads