Working on my old 3020 again. Just replaced the load control shaft, seals and all that. Resealed the quick couplers in the back (what a pain in the bum) going to do the power brake thing next. BUT
I know my 3 point leaks down pretty quick. I am pretty sure the piston is leaking by. Do I have to pull off the entire lift housing or can I just pull those 4 bolts off the back and get to the piston. I am pretty sure I would be able to see it. Not sure exactly how to get it out though. Any ideas or information would be appreciated.
When I get done with this one and get it back in the field I am starting on a 4020 next.
I know my 3 point leaks down pretty quick. I am pretty sure the piston is leaking by. Do I have to pull off the entire lift housing or can I just pull those 4 bolts off the back and get to the piston. I am pretty sure I would be able to see it. Not sure exactly how to get it out though. Any ideas or information would be appreciated.
When I get done with this one and get it back in the field I am starting on a 4020 next.