Mr thinker on facebook

wilson ind · Mar 14, 2019

Greene Magazine said Mr thinker could be accessed by facebook. As much as I dislike facebook I tried . How would one gain access ??

Randy G · Mar 14, 2019

You must be a signed up member and jump threw hoops.

WGM · Mar 14, 2019

What hoops must be jumped ?threw??

jdjerry · Mar 15, 2019

Hula hoops and then basketball hoops.

buickanddeere · Mar 15, 2019

(quoted from post at 03:57:43 03/15/19) Hula hoops and then basketball hoops.

Still, it is worth all that to enjoy the wit and wisdom of Mr Thinker .

SVcummins · Mar 15, 2019

mail it in then we can all watch you be made to look like a fool for those of that refuse to have Facebook. Whatever your question is also be sure to ask how many 4020 diesels with powershifts we?re equipped with the rollomatic front end 😂😂😂 and while your at it ask how many Four bottom f130 plows were ever made ? I mean you can?t have cake without the icing right ?

BlaineM · Mar 15, 2019

Glen,some of the answers mr. Thinker gives is what you would
say word for word.

Tx Jim · Mar 15, 2019

(quoted from post at 06:50:38 03/15/19) Glen,some of the answers mr. Thinker gives is what you would say word for word.

Surely you're kidding! :lol:

Pete in MD · Mar 15, 2019

That's because he's one of the Mr. Thinker writers.

buickanddeere · Mar 15, 2019

(quoted from post at 06:50:38 03/15/19) Glen,some of the answers mr. Thinker gives is what you would
say word for word.

Purely coincidence or he googles and copies my work .

Richard in Bee · Mar 15, 2019

(quoted from post at 17:14:12 03/14/19) Greene Magazine said Mr thinker could be accessed by facebook. As much as I dislike facebook I tried . How would one gain access ??

Are you saying that you sent a question via facebook, or that you just can't find the page? I haven't seen any new questions lately.

Richard in Bee · Mar 15, 2019

(quoted from post at 02:52:52 03/15/19) mail it in then we can all watch you be made to look like a fool for those of that refuse to have Facebook. Whatever your question is also be sure to ask how many 4020 diesels with powershifts we?re equipped with the rollomatic front end ???????????? and while your at it ask how many Four bottom f130 plows were ever made ? I mean you can?t have cake without the icing right ?

Or if he knows where to apply the decals from the set you bought at TSC.

buickanddeere · Mar 15, 2019

(quoted from post at 15:48:50 03/15/19)

(quoted from post at 02:52:52 03/15/19) mail it in then we can all watch you be made to look like a fool for those of that refuse to have Facebook. Whatever your question is also be sure to ask how many 4020 diesels with powershifts we?re equipped with the rollomatic front end ???????????? and while your at it ask how many Four bottom f130 plows were ever made ? I mean you can?t have cake without the icing right ?

Click to expand...

Or if he knows where to apply the decals from the set you bought at TSC.

Mr Thinker would like to tell those people where to stick the TSC decals .

wilson ind · Mar 15, 2019

Cannot find the page. Or any mention of the site.

larryanderson · Mar 15, 2019

I would say Tim S. and Tx Jim would make excellent Mr.Thinkers.I sometimes try to answer 4020 questions if I happen to know but to me there is no place for rudeness no matter how uninformed the question is.

Tx Jim · Mar 16, 2019

Larry
Thanks for compliment but Tim's more qualified for that role than I am.
Jim

John T · Mar 16, 2019

Some years back after I wrote several electrical related articles for The Green Magazine I was called on for advice in answering a few Mr Thinker questions and was glad to contribute. I haven't written for them for several years nor been consulted anymore, getting too old I reckon lol Its a great magazine in my opinion.

John T

Rich'sToys · Mar 16, 2019

(quoted from post at 07:17:37 03/16/19) Some years back after I wrote several electrical related articles for The Green Magazine I was called on for advice in answering a few Mr Thinker questions and was glad to contribute. I haven't written for them for several years nor been consulted anymore, getting too old I reckon lol Its a great magazine in my opinion.

John T

John, didn't you use to also be on their forum when they had one? I seem to recall reading your posts on there. I was a member of that forum also till they dropped it and went to Facebook. I'm not on FB, so that ended that. Still get the magazine though.

DoubleO7 · Mar 16, 2019

What is the big "fear" of being on facebook?
Are you paranoid of devil worshipers triggering evil thoughts in your head if you look at that particular website?

Rich'sToys · Mar 16, 2019

(quoted from post at 09:37:07 03/16/19) What is the big "fear" of being on facebook?
Are you paranoid of devil worshipers triggering evil thoughts in your head if you look at that particular website?

Not "afraid" of anything. It's just that I already have enough ways to waste time (this place being one of them). I don't need any more.

tlock0331 · Mar 16, 2019

(quoted from post at 09:37:07 03/16/19) What is the big "fear" of being on facebook?
Are you paranoid of devil worshipers triggering evil thoughts in your head if you look at that particular website?

where did you read there was some MASSIVE fear? thats kinda putting words in somebody's mouth for no reason...its part of a "free society" one can choose not to partake in something...well...except death, taxes, and health care, but the point remains the same, kind of a D thing to insinuate isnt it?

my grandparents dont FB, i dont either, and neither of us dont because of the "DEVIL"....are you that bored at home you need to make up s like that?

d's gonna d i guess....

Spring is right around the corner, go get ready for that instead of making s up....geesh..... :roll:

tim s · Mar 16, 2019

I don't face book ether,,too much Crapp gets mixed up into making a lot of people mad for taking it out of concept,,I get enough Drama with broken bolts....I don't care if others do,,,I just don't want to....

James Howell · Mar 16, 2019

"[b:654c4848f0][i:654c4848f0]to me there is no place for rudeness no matter how uninformed the question is.[/i:654c4848f0][/b:654c4848f0]"

Agree.

buickanddeere · Mar 17, 2019

(quoted from post at 19:29:23 03/16/19) "[b:33b9a599d6][i:33b9a599d6]to me there is no place for rudeness no matter how uninformed the question is.[/i:33b9a599d6][/b:33b9a599d6]"

Agree.

There is "uniformed" and then there is "should know better".

Richard in Bee · Mar 18, 2019

To find Mr. Thinker's facebook page, just go to https://www.facebook.com/Mr-Thinker-126383314076299/

As I've said or written many times over the years, I get 50 people who say, "What happened to Mr. Thinker, he's gotten too nice?" to every person who says that's he is mean or rude.
In most cases when we do give someone an answer that some might consider rude, I send them an actual straight answer, especially if I know that they are either young or new to the hobby.
It should be known also that in many cases people asking ridiculous questions are "trolls", just trying to see what they can get Mr. Thinker to say.

SVcummins · Mar 19, 2019

I didn?t even know tsc sold decals?

Richard in Bee · Mar 20, 2019

(quoted from post at 23:52:08 03/18/19) I didn?t even know tsc sold decals?

Not sure they do anymore. No room for them with all of the dog food, turkey fryers and clothes.

Mr thinker on facebook

Well-known Member

Member

Well-known Member

Member

Well-known Member

Well-known Member

Member

Well-known Member

Well-known Member

Well-known Member

Member

Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Member

Well-known Member

Well-known Member

Well-known Member

Member

Well-known Member

Member

Similar threads