Installing lights on 2040

I am needing to put some lights on it.
I am going to go with LEDs. How and where are the best places to mount them? I am needing front and rear lights and I am considering caution lights. If you have pictures that would be great


Thanks
 
Graveyard, my email should be open, I see your's isn't but if you email me or give me your email address I will try to help. Just put LED's on Dad's 4020 this summer, everything, dash lights, fenders, front light bar, so will try to help. Thanks.
 
. The front nose piece in a 40 series will swap out for the lighted nosepiece from the 55/55 series .
My 1640 is probably the only one or one of very few with a row of factory lights across the front .
 
. The front nose piece in a 40 series will swap out for the lighted nosepiece from the 55/55 series .
My 1640 is probably the only one or one of very few with a row of factory lights across the front .
 
"The front nose piece in a 40 series will swap out for the lighted nosepiece from the 55/55 series .
My 1640 is probably the only one or one of very few with a row of factory lights across the front ."


Is this true for the "old-style" 2040s, as well?
 
. With the new style nose . Just a walk through the parts book .
I did goof and installed the little chrome emblem upside down .
 
I thought I remembered correctly on that. But it would be nice to be able to slap some "factory" front lights on our family's 2630...
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top