1963 John Deere 4010 Diesel wide front Year-a-round cab

jrsavoie

Member
1963 John Deere 4010 Diesel wide front Year-a-round cab

Where do I find info or pictures for how to mount a Year-a-Round cab?

I have the cab here. There are 2 holes in the front. There is a brace on the tractor - on each side - that looks like it would go to the front holes.

It is obvious the 2nd set of holes was used - there were carriage bolts in the holes. I do not know if I am missing any parts.

How do the steps bolt on?
 
I do have the original installation instructions for a Year-A-Round cab for your John Deere tractor. Has written and pictures to mount-electric- heater. Is that what your looking for?
 
Yep. As long as it also has info on how to mount the cab and steps. I think I have it figured out. But it never hurts to see the instructions.

I've been wrong before

Is there a way to view the instructions online? Can you email them to me if you can not post them here?

Thank you very much!
 
Posted by JIM MN on September 25, 2018 at 17:24:28 from (67.4.70.210):

In Reply to: 1963 John Deere 4010 Diesel wide front Year-a-round cab posted by jrsavoie on September 24, 2018 at 13:26:03:

I do have the original installation instructions for a Year-A-Round cab for your John Deere tractor. Has written and pictures to mount-electric- heater. Is that what your looking for?

Would you be willing to share the instructions online or sell them?
 
(quoted from post at 17:24:28 09/25/18) I do have the original installation instructions for a Year-A-Round cab for your John Deere tractor. Has written and pictures to mount-electric- heater. Is that what your looking for?

dOES ANYBODY KNOW HOW TO CONTACT JIM MN ?
 
Been gone from computer, I can help you. Give a call--9524665722. Give me your address and I will mail you a copy of the Year-Round Cab mounting intructions I have.
 
I googled, but got no results for installation instructions. We got the cab on, But it's not right.

I do not think we have all the pieces for mounting.

The 3 point hit when all the way up. It looks like we need to be higher or a little more forward or both.

We didn't think the brackets on the tractor should have been adjusted when the cab came off. If we go forward, the front brackets will have to go forward also.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top