MW oil pan 5010-5020?

tomstractorsandtoys

Well-known Member
My Deere dealer asked me if M&W ever made a big oil pan for a 5010-5020. I do not think they did but I thought I would ask here if anyone knows or has seen one. The 5010-5020 had more oil pan capacity than a 4020 from the factory so I doubt there was one. Thanks Tom
 
I have had many M&W pans but think the 531 in 5020 already had a 20 quart capacity oil pan which was what the largest oil pan from M&W held.I have had one for a 4320/4520 that didn't have place for filter.They were made for the early 4010/4020 that only held 8 quarts which was not a lot for the increase in power of 20% plus.The increase to 12 quarts was better suited for more horsepower. The tough ones to find and I have several inquiries is the IH pan.A nice JD pan will bring $1K+ an IH one will bring more.I have only had one but know where a few are but not for sale. I have one on my late 4020 and it makes for a conversation piece as it is different.
 
I have an M and W pan with out the filter hole but will not work on a 7700 motor that I put into a 4520. The oil pump sump is in the way.
 
I never have used it, think is bolted on a engine now just to keep dust out. I think I still have an m and w exhaust manifold for a 4020. After harvest I need to go thru spare parts,maybe someone can use them. I also have a mfwd axle and transfer case for a 4840. Very few of them were made as most were hydraulic.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top