I'm currently handling my large net-wrapped round bales on the 3-point of a JD 2510 diesel, but would like to be able to lift the round bales higher on occasion. I'm wondering if my JD 2030 with a 145 loader would be too light to handle big round bales if I bolted a spear to the bucket? I have a weight box for the back of the 2030 and a some wheel weights, fluid etc. but wondering if lifting large round bales would be too much for the front end or the loader itself. I've seen where guys weld a 1/4 inch plate to the top side of their bucket and then drill holes to accept a bolt-on bale spear. Is this something I should consider for this tractor/loader or is it just going to be too much for the front end or the loader itself? Thanks much in advance for any advice.