38" Rims John Deere A

Navajo350

Member
Can 38" rims go on an A, with no rake? I had them on my unstyled A and there was rake. I have a guy asking about them for his A. Is there a difference with those on the styled? They are cast iron.

Thanks,
Bob
 
"[b:654c4848f0][i:654c4848f0]<font color="#6699ff">Can 38" rims go on an A, with no rake?[/i:654c4848f0][/b:654c4848f0]</font>"

Yes.

"[b:654c4848f0][i:654c4848f0]<font color="#6699ff">Is there a difference with those on the styled?[/i:654c4848f0][/b:654c4848f0]</font>"

No, based on your statement that "[i:654c4848f0]They are cast iron.[/i:654c4848f0]"

Take a look at the Model A unstyled [b:654c4848f0]CAST REAR WHEELS[/b:654c4848f0] diagram below.

a277891.jpg" width="650"


Note that the cast disk wheel (Key 1) [b:654c4848f0]AA 3816 R[/b:654c4848f0].

Also note that the cast disk wheel (Key 12) [b:654c4848f0]AA 3816 R[/b:654c4848f0] for all Model A styled tractors.

Take a look at the Model A unstyled [b:654c4848f0]DEMOUNTABLE RIMS[/b:654c4848f0] diagram below.

a277896.jpg" width="650"


Note that all 38in. demountable rims (Key 1) are designed for cast disk wheel [b:654c4848f0]AA 3816 R[/b:654c4848f0].

Also note that the demountable rims (Key 16) are the same part number for all Model A styled tractors.

Hope this helps.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top