Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

John Deere Tractors Discussion Forum
:

2940 John Deere, injector pump

Welcome Guest, Log in or Register
Author  [Modern View]
sevenmzone

10-16-2016 17:15:59




Report to Moderator

I have fuel coming out of the top of the injector pump one leak is where the throttle is attached the other is where the kill is attached. How do I fix this?




[Log in to Reply]   [No Email]
Dieseltech

10-16-2016 20:20:52




Report to Moderator
 Re: 2940 John Deere, injector pump in reply to sevenmzone, 10-16-2016 17:15:59  
Agree 100% with AL, it's best in the long run to have the pump completely gone through. While the leaks you have now could be fixed on the tractor, too many times I've seen other leaks show up soon after. That's why I refuse to do top cover seals only, just bites you on the backside later. Head seal, drive seals are about to give up and leak soon anyway..



[Log in to Reply]  [No Email]
Al Baker(pumpman)

10-16-2016 19:31:29




Report to Moderator
 Re: 2940 John Deere, injector pump in reply to sevenmzone, 10-16-2016 17:15:59  
The leaks you describe is the "messenger" It is trying to tell you the age and condition of your drive seals. You can remove the cover and replace the throttle shaft n kill shaft o rings. This will buy a little time, but you are playing a game with a loaded gun. When,, not if, the drive shaft seals fail you will start dumping fuel into the crank case. If you catch it in time you will need pump work. If you dont catch it in time you need a engine mechanic. If it was my tractor I would send it off for a reseal job. This isnt a lot of money, and you will have to get it done in time anyway. A reseal job should cost 350-450 bucks. This is way less than engine work so I figure it money well spent. Call around to pump guys and ask questions. Anyone who gives you a really high price walk away from. If their price is Cheap Ask more questions. To get a good job done right takes time, witch is money. So cheap means skipping over something. Ask about warranties and turn around time. What good is a good price with no guarantee it will work right, and for how long? What if you send it in and it takes 4 weeks? A few min. on the phone will make you feel better about who you pick. I have done hundreds of these pumps, so if you cant find someone in your area that will help you out, I would be glad to get the job done Good luck,,, Al 231/757/0064

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Fordson Model N: Field Service Operations and Lubrication - by Anthony West. The daily or weekly servicing of any vehicle is of the utmost importance, and in days gone by when our favorite tractors were doing an important and Commercially vital job on the farm, these service operations would make a major difference to the running costs and economy of the farm. This being so, it surprises me to see how many enthusiasts attending rallies, shows etc, seem to be unaware of the importance of this constant attention. Possibly the modern machine with its 6,000 mile or even once ... [Read Article]

Latest Ad: Square axle jd B complete tractor not stuck but doesn’t have to run looking for a project thanks [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy