5020MW add-on turbo exhaust elbow

Big Jugs · May 6, 2012

Looking for a good M&W add-on turbo exhaust elbow. mine is rusted out on bottom from water sitting. Apparrently tractor sat outside for a while with no exhaust cap before I bought it. Thanks. Dale. 715-377-6248.

gpuller · May 7, 2012

If you can't find one you could make one, my brother built one for our 5020. Did it so the exhaust would come out the factory hole in the hood.
He used 3 90 deg pipe weld fittings, 3" I think. One was welded to the ring on the outlet of the turbo and turned to the right. Another elbow was welded to bring it back towards the seat. The last elbow was welded straight up out the factory hood hole. He also welded a sleeve on the outlet elbow so a 4" straight pipe could be used.
Sorry no pics but I could sketch something up if needed. Any questions let me know.

5020MW add-on turbo exhaust elbow

Big Jugs

Member

gpuller

Member

Similar threads