Farmhand F 10

We picked up that loader way back in the 60's. Cleddy

This post was edited by cleddy on 02/10/2023 at 07:48 am.
 
I had a chance to measure the Farm Hand loader back frame and it 90 inches wide where the cylinders and arms were mounted outside the back tires and 94 inches tall to the top of the tilt cable pulleys. ? Cleddy

This post was edited by cleddy on 02/10/2023 at 07:51 am.
 
Thanks! More questions, is this another loader frame, or the one on the AC you posted? If it's a different loader, do you recall what tractor it was last used on, and any more pics if possible? Thanks again.
 
These Measurements are for the loader mounted on the WD Allis Chalmers in these pictures. Cleddy

This post was edited by cleddy on 02/10/2023 at 07:53 am.
 
I wish some people would post pictures of an original Loader??Cleddy


This post was edited by cleddy on 02/10/2023 at 07:50 am.
 
mvphoto102003.jpg


mvphoto102004.jpg


This is my 70 with a F10. Two different loaders as the picture with the brush was with the old loader that was so wore out that it about fell apart when I removed. Traded for the second that was in great shape.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top