Massey Ferguson chisel split rim tube installation ??

I have a split rim. Its a 4x9. Three bolts and the rim comes off in halves. I hav the right tires and the 4x8.00/9 tube but I cant get it together without pinching it. How the f- do you get this together????!!!!
 

Also, the tube has a stem in the dead center and the hole in the rim is off to the side. Looks like the stem is going to rip before long.
 

I thought on it a little and that seems to be the only way. I used abundant amounts of soapy water on all surfaces, put a little air in the tube and the screwed the two halves together with the idea and hope that the tube would slip out of the way. No way to tell after assembly but hopefully its good. Lol.
 
That setup should probably have a flap between the tube and
rim . If the hole in the rim doesnt match the tube it will tear the
stem off in little time . Just had one I had to drill a different
hold in the rim to match the tube
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top