535 JOHN DEERE ROLLER WIREING DIGHRAM

ON a 535 monitor plug, i've been in this before on the tractor side of plug you have (5) wires on roller side you have (6) wires, best i can remember i left the white one out. As of now everything works except the flashing light getting ready to tie. so the white wire has to go with another color, in other words together. can anyone look at a dig. and get me straight. Thanks RONNIE
 
I forgot to mention, we are not working with a j.d. plug , been replaced with a tag along trailer plug. so no # "s don't apply. had to match color codes and had one left over.

This post was edited by ronnie wheat on 10/03/2021 at 07:22 am.
 

535 rd baler/monitor wiring diagram is available to view for free at https://techpubs.deere.com/en-US/Search/Equipment

mvphoto82599.png


mvphoto82600.png
 
TX JIM thanks for input, still can't figure out what wire to put the white one with, has to be doubled up because got 5 on monitor end and 6 on roller end..
 
Yeah and my memory isn't as good as once was. Maybe 6 on one end 7 on the other. I do know i've got a white wire that don't match up with the other end. Can't go with numbers , had to match colors. And it all worked till my SON tied the cable to the lift arm which bled off and pulled all the wires out of plug, it all works now except the getting ready to tie light which flashes. the same light works when full, but got to be on your toes, when that light comes on it is tying. NO WARNING what so ever

This post was edited by ronnie wheat on 10/03/2021 at 10:26 am.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top