(800) 853-2651
SHOP NOW

Belly mower identification help!

H

Hansen656

New User
Can anyone help me identify this belly mower. I know that it doesn't have all the parts but I'm struggling with trying to figure out what brand and what it belongs in. I was assuming a cub. Any help would be much appreciated.

This post was edited by Hansen656 on 08/16/2021 at 12:36 pm.
 
(quoted from post at 15:34:01 08/16/21) Can anyone help me identify this belly mower. I know that it doesn't have all the parts but I'm struggling with trying to figure out what brand and what it belongs in. I was assuming a cub. Any help would be much appreciated.

This post was edited by Hansen656 on 08/16/2021 at 12:36 pm.
Click to expand...

Not always, but in many cases new users have to have 5 or more posts on record before the site lets them post pictures, due to site spam filters. Another option is to go down to the Site Comments Forum and ask YT Support for permission to post prior to that. You can try going down to the Test Forum and making several posts there to get your post count up, trying to attach your pictures to each post. That may work after you make several posts. Then make your post here again. It may not work immediately after you get past the 5 posts, if not, you might try logging out and back in at that point. There is a size limit as well, I think it is a total of 7mb per post (be it one picture or the total of several). Some pictures (often taken with phones), are too large and have to be reduced before they will post.
 
(quoted from post at 13:16:27 08/16/21)
(quoted from post at 15:34:01 08/16/21) Can anyone help me identify this belly mower. I know that it doesn't have all the parts but I'm struggling with trying to figure out what brand and what it belongs in. I was assuming a cub. Any help would be much appreciated.

This post was edited by Hansen656 on 08/16/2021 at 12:36 pm.
Click to expand...

Not always, but in many cases new users have to have 5 or more posts on record before the site lets them post pictures, due to site spam filters. Another option is to go down to the Site Comments Forum and ask YT Support for permission to post prior to that. You can try going down to the Test Forum and making several posts there to get your post count up, trying to attach your pictures to each post. That may work after you make several posts. Then make your post here again. It may not work immediately after you get past the 5 posts, if not, you might try logging out and back in at that point. There is a size limit as well, I think it is a total of 7mb per post (be it one picture or the total of several). Some pictures (often taken with phones), are too large and have to be reduced before they will post.
Click to expand...

Thank you for the advice. I was wondering why I couldn't get my pictures to load. But also I'm not too good with figuring out how to use the forums. Thanks again
 
mvphoto80313.jpg


It is 48" wide
 

I thought the same thing however the woods mower seems to be mounted the other direction meaning that the wheels are on the straight side of the deck facing the front of the tractor. Also I'm not sure what tractor it would go on with that tail coming off the rear of the deck.
 
(quoted from post at 15:41:16 08/17/21)
I thought the same thing however the woods mower seems to be mounted the other direction meaning that the wheels are on the straight side of the deck facing the front of the tractor. Also I'm not sure what tractor it would go on with that tail coming off the rear of the deck.
Click to expand...

How about a few readable pictures of the decal on the deck. The wording might give a clue to someone.
 
(quoted from post at 18:23:03 08/17/21)
mvphoto80359.jpg
Click to expand...

Looks like a Woods to me too. My Cub has a C59" deck and has the two less idler pulleys? But it is obviously a different deck so that means nothing. I have seen smaller Woods decks that have a different shape and I don't remember the cut. I remember them looking different but this could be a newer Cub deck. Mine has that shaft that fits in bracket on back of the Cub. Sorry I have no definitive answer that it might be for a Cub? Try looking on Ebay or Facebook Market place for pics that might give a clue. I have had to do that while trying to identify mounting brackets or lack of them on decks being sold. Woods made a lot of decks for a lot of small tractors so good to research it thoroughly. It to me looks like a HD Woods deck but the idler pulleys remind me of a more modern garden tractor deck? Just guessing. Good luck. Regards, John.
 
Woods Brothers MFG Co. was/is located in Oregon, IL.

This patent drawing is on the Woods website History. Patent drawings aren't always exactly as all were built.

mvphoto80495.jpg
 
You must log in or register to reply here.

Similar threads

N
Mccormick drill identification help
Replies
3
Views
339
Nickthole11
N
R
Old New Idea Manure spreader identification
Replies
12
Views
554
Northvale PA
N
R
Ford 4000 1960 s?
Replies
12
Views
838
richmuraski
R
W
Draft control fork
2
Replies
22
Views
2K
JMOR
J
Z
Spindles Need Help Identifying
Replies
4
Views
292
Ultradog MN
Ultradog MN
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top