Front end loader ID help!!

ptfarmer

Well-known Member
Location
San Antonio, Tx
I need help to ID a front end loader, I've seen the logo before, but I can seem to remember what brand.
mvphoto70264.jpg
 

Dunham Lehr model 22 later became Farmhand 22 later bought by Agco

Good loaders for 35-55hp 2WD tractors, makes a good light weight loader for feeding round bales with a larger 2WD tractors.
I have 2, one on a 4000 Ford and one to go on my 6600 project tractor.
 
That loader looks about half big enough for that 90hp or more tractor. I would be afraid of mounts or something to fail. Just a thought.
 
I'm looking at buying one just like the one in the picture, but it will be going on a smaller tractor. I'll be making my own mounts so the mounts will be overkill.
 
Ayup, Dunham Lehr/Farmhand 22!
I have 2! One with the smaller lift cylinders is on my 3910, and the other with the larger lift cylinders on my 5610-2 Have a 66" material bucket, a 90" snow bucket & a set of forks, all 3 will attach to either loader.
 
(quoted from post at 12:24:51 02/18/21) That loader looks about half big enough for that 90hp or more tractor. I would be afraid of mounts or something to fail. Just a thought.

Nephew has one like that on his 1086 IH for feeding cows, we get a lot of mud in winter months and the normal size loader is heavy pushing the front tires down into the mud hanging a 2wd tractor.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top