(800) 853-2651
SHOP NOW

spreader parts needed

P

pcp20us

Member
Ha all in the US of A.

I picked up this speader. Ive ID'd it as a teagle torus 1997 broadcaster made in England..

It had a removable piece for the adjustable plate disks and shut off plate.

So looking at fabricating something up. 2 plates with 2 holes to adjust the feed rate and another plate as the shut off plate.

I have no experience with these speaders. So looking for ideas on the best design.

I have found these disks which would be good, Only found them in the US thou. https://www.agrisupply.com/distribu...aystractors.com/photos/mvphoto62502.jpg[/img]
 
Ha all in the US of A.

I picked up this speader. Ive ID'd it as a teagle torus 1997 broadcaster made in England..

It had a removable piece for the adjustable plate disks and shut off plate.

So looking at fabricating something up. 2 plates with 2 holes to adjust the feed rate and another plate as the shut off plate.

I have no experience with these speaders. So looking for ideas on the best design.

I have found these disks which would be good, Only found them in the US thou. https://www.agrisupply.com/distribu...aystractors.com/photos/mvphoto62502.jpg[/img]
 
Ha all in the US of A.

I picked up this speader. Ive ID'd it as a teagle torus 1997 broadcaster made in England..

It had a removable piece for the adjustable plate disks and shut off plate.

So looking at fabricating something up. 2 plates with 2 holes to adjust the feed rate and another plate as the shut off plate.

I have no experience with these speaders. So looking for ideas on the best design.

I have found these disks which would be good, Only found them in the US thou.
Any help, or picks of your spreader setup would be great.


Cheers
Looking into hopper
mvphoto62499.jpg


close up Looking into hopper, where missing plates attachment
mvphoto62498.jpg



Looking underneath at vanes, missing plate attachment
mvphoto62500.jpg


Pix from the orginal brochure, showing removable plate attachment
mvphoto62502.jpg
 
You must log in or register to reply here.

Similar threads

P
spreader parts needed
Replies
1
Views
320
pcp20us
P
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top