Hello all, I recently bought a ford 903 phd with a 24" auger.
I would also like to attach a 6" or 4" auger from tsc. My issue is that what I believe to be the shear pin is appears to be bent inside the auger.
Anyone have any suggestions on how to remove the bolt or how to purposely break the bolt.
I also believe that the 903 takes 2-9/16 if anyone can confirm that. Thanks
I would also like to attach a 6" or 4" auger from tsc. My issue is that what I believe to be the shear pin is appears to be bent inside the auger.
Anyone have any suggestions on how to remove the bolt or how to purposely break the bolt.
I also believe that the 903 takes 2-9/16 if anyone can confirm that. Thanks