3 Pt Hitch Assembly

WNYBill · Aug 12, 2020

I am going to rebuild a worn out cultipacker into a 3 pt hitch unit about 6 ft wide that I can transport to remote food plots. Is there a 3 pt hitch assemble available or do I just fabricate one?

DeltaSteve · Aug 12, 2020

Fabricate one.You're gonna have to build brackets and possibly modify a store bought hitch anyway.

Traditional Farmer · Aug 12, 2020

I turned a pull type cultipacker into a 3pt used the hitch off an old 3pt disk harrow.

Harold Hubbard · Aug 13, 2020

Go on Craigslist or wherever, and buy the cheapest junk 3 point implement you can find, use that as a starting point.

Traditional Farmer · Aug 13, 2020

As a side note I'll add the 3pt cultipacker didn't work too well, turning is about impossible with it,but its good to get into rough places and to transport.

Russ from MN · Aug 14, 2020

Make sure you put the top link bracket high enough, I didn't once and the implement doesn't stay level when I lift it. Find a good implement and measure it up.

WNYBill · Aug 15, 2020

I just want something for our small plots, no turning, just pick it up and turn around. I figured I would have to fabricate one. We have a 12 ft cultimulcher for the bigger plots.

Bill

3 Pt Hitch Assembly

WNYBill

Member

DeltaSteve

Member

Traditional Farmer

Well-known Member

Harold Hubbard

Member

Traditional Farmer

Well-known Member

Russ from MN

Well-known Member

WNYBill

Member

Similar threads