John Deere #3 sickle bar mower

reinbacon

New User
This message is a reply to an archived post by James Howell on May 02, 2014 at 05:22:25.
The original subject was "Re: John Deere 3 sickle bar mower".

Mr. Howell, I have recently acquired a John Deere No.3 Sickle Mower. After doing some research I have come across your name. I was wondering if you could help me out with how the gears come apart. Something is locked up in the gear box and I want to pop it loose but I don't want to break the castings beings as they are hard to come by. Please advise.

Craig
 
If James can't help, (he probably can) there is a book by Lynn Miller titled The Horse Drawn Mower which covers mainly IH and John Deere mowers with a ton of information and pictures. Probably available from Rural Heritage Magazine.
 
"[b:654c4848f0][i:654c4848f0]I was wondering if you could help me out with how the gears come apart[/i:654c4848f0][/b:654c4848f0]"

Reviewed the [b:654c4848f0]Directions For Setting Up and Operating JOHN DEERE No. 3 ENCLOSED GEAR MOWER (HIGH LIFT)[/b:654c4848f0] manual under the [b:654c4848f0][i:654c4848f0]17. REMOVAL OF GEARS, AXLE AND SHAFTS[/i:654c4848f0][/b:654c4848f0] topic on pages 9 - 10.

cvphoto45796.jpg


cvphoto45797.jpg


Hope this helps.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top