(800) 853-2651
SHOP NOW

Three point hitch

H

herne19d

New User
I'm looking for a quick-adjust leveling arm that will fit my TC-30.
Something like the ones that are found on 8N and 9N Fords.
New Holland sells one, but it is $450+.
Any help would be great.
 
This site has them for about 60.00 +shipping. Most of us like to support them because they allow us on here free of charge. I do believe what you have is a TO 30 not a TC30. Ant that's only roughly a 400.00 savings for you too, just look on the top of the page and click on Ferguson then follow the model and scroll down to the 3 point hitch section and you will see it. Keith



t
 
Thanks SC, my mind was stuck on TO30, I never pay any attention to the compacts, so I didn't recognize the number. Keith
 
Never heard of that type of model either. People think we are mind readers by not including information we need to know what they are talking about.
 
And that is why I thought like the other poster he had put model down wrong. The model we thought he was talking about that part is same as the Fords of that age.
 
I wouldn?t have known either but when I was working at her New Holland dealer I assembled a lot of tc 30 tractors and installed loaders and backhoes on these little tractors
 
If he would just have put in year of tractor. Would have got away from confusion. He sait type used on old Fords made things worse.
 
(quoted from post at 11:09:52 07/24/19) If he would just have put in year of tractor. Would have got away from confusion. He sait type used on old Fords made things worse.
Click to expand...

To the guys who had the helpful answers, Than You very much. I found a part that will work for a decent price.

To those who did not actually read what was written and made assumptions and snarky answers, not so much.

It is correct, I did not put the year or make. And I said "similar to"
The correct model number was in there.
Assumptions were made and people feel the need to try and make it my fault that they looked foolish.
Thanks for that.
 
You must log in or register to reply here.

Similar threads

H
Ford 8n Snowplow Width
Replies
6
Views
401
g ostby
G
S
John Deere A can't get the 3 point hitch to go up
Replies
6
Views
454
used red MN
U
D
Ih 254 three point problems
Replies
3
Views
182
Jim Becker
J
B
60 MF-35 3 point lift problem.
Replies
1
Views
138
Butch58
B
F
Farmall 130 hitch conversion
Replies
16
Views
522
BunkumBen
B
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top