vermeer baler pickup removal

steven in Tn · May 18, 2019

was in process of changing the bearings on the pickup shaft on a vermeer 505 super I and noticed the fiberglass bushings are completely gone. i cant see how the whole shaft can come out. by looking at the part diagram im thinking the whole assembly has to come out and then maybe slide the sides off the shaft someway?

anyone ever had one of these apart and care to help me out with how to take it apart?

Cory Schmidt · May 18, 2019

been a while but we took the end off a 403F to repair the cam track. Just have to study it over and find what looks like it holds what ever you are trying to remove.

steven in Tn · May 18, 2019

(quoted from post at 19:11:49 05/18/19) been a while but we took the end off a 403F to repair the cam track. Just have to study it over and find what looks like it holds what ever you are trying to remove.

i took a few bands and teeth off and was able to get to the bad bushing. now just got to buy one and put it in.

vermeer baler pickup removal

steven in Tn

Member

Cory Schmidt

Well-known Member

steven in Tn

Member

Similar threads