(800) 853-2651
SHOP NOW

How to dismount a ford loader

I would imagine someone had to a bit of
engineering to fit tht ford loader to the John Deere
without a picture kinda hard to tell . A big tree or
another loader tractor or overhead hoist will be what
you?ll want to start with
 
All right thanks for the advice. Now maybe I should have said that it is a 776B Quick Attach. Does that help or make a difference in how I go about taking it off the tractor?
 
See if you can find an owners manual for it and also a parts book, possibly on line. With that you should have no problems as it will tell proper procidure for removing or mounting. I don't know anything about that loader. The Dunhan I had on a Ford was simple to see how to do it but not all are.
 
Since it?s 2 different manufacturers cobbled together, we would need a picture to see what parts are there to work with, more blue parts or more green parts thrown into
the mix......

Then too we could draw on your pic and point tot he starting points, etc.

Paul
 
If it was like the Ford loader on a 7700 I ran for years you set the bucket flat on the ground and pull the lock pins out, then Slowly back away while "raising" the loader arms, this will allow the sub frame to go down to the ground and hold up the loader when stored, some have both sets of hoses long enough to back out all the way others you have to unhook the bucket hoses, shut off tractor when you are clear of the sub frame then carefully work the remote lever or levers to relieve the psi on them unhook hoses and hang on the loader. Other models have stands ect,, you should be able to order a ops book from a cnh dealer for the loader operation
cnt
 
I may have told you about the one Ford we also had with the Leon loader,, we had three tractors with loaders, I do not rememebr any stands on the Ford loaders we had they all would stand on their own, always remove it on the most level place you can
 
You must log in or register to reply here.

Similar threads

Alan Mac
Looking for loader 776 770
Replies
3
Views
143
Alan Mac
Alan Mac
F
Wagner Loader
Replies
0
Views
75
fusion1
F
B
Woods DuAl 195 Loader Float Position
Replies
8
Views
368
bwalsh
B
F
Wagner Loader
Replies
0
Views
251
fusion1
F
M
Paulson loader front hanger bracket for an 8N Ford
Replies
6
Views
836
rrlund
R
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top