Sometime back there was a discussion about taking off and re-installing front end loaders on tractors. Someone posted pictures of a fixture he'd made, the tractor was driven forward until the loader bucket slid into the fixture at ground level then, after the the necessary clamps/bolts/whatever, were loosened the bucket was rolled-back to lift the loader clear of the tractor.
I have had zero luck with the removal braces Dunham-Lehr provided for their model 22 loader on my tractor so would like to build a copy of the fore mentioned loader removal fixture. Last time my loader was off it required a boom on another tractor and last time it was installed it took a neighbors New Holland tractors 800lb rear tire parked in the bucket to anchor the loader for re-installation.
I have had zero luck with the removal braces Dunham-Lehr provided for their model 22 loader on my tractor so would like to build a copy of the fore mentioned loader removal fixture. Last time my loader was off it required a boom on another tractor and last time it was installed it took a neighbors New Holland tractors 800lb rear tire parked in the bucket to anchor the loader for re-installation.