More Implement Value 2

Hopsing

Member
I have several pieces of equipment that I am going to sell but have no idea what is their value. I thought I'd use the experts on this forum for any information. I'll use a different thread for each item.

The second item also from around 1957 is an 8' disk. It is made by Burch Plow Works from Evansville IN. Again a three point hitch implement. All disks are in good shape. Hasn't been used for close to 35 years, but has been oiled and stored inside.

Thanks again
Rick


mvphoto27754.jpg


mvphoto27755.jpg


mvphoto27756.jpg
 
Nicest piece I?ve seen, tho the blades look small to me, are they worn down? Might just be the camera angle/ shadows. The 10 acre fellas can use this, handy and
looked for.

Paul
 
I have an 8' Burch disk Just like that. Bought it at Auction for $100. Not as nice or good as yours but works good. Unfortunatally, any odd brand piece implement does not bring much at auction.
 
Looks in fine shape, but disks appear pretty well worn. Around here, you could advertise for $500 but expect to get around $400. This would be private sale. At a consignment auction, it's tough to tell. I've seen them go for under $100 and over $500, just depends on the crowd that day.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top