mikewood869
Well-known Member
After putting this off, today I found out that the shaft going from the wood chipper to the tractor is too short which the chipper pto shaft needs the orc. Last month when woods mowing the pto button came out mostly (the spring was still in there and was dead) when I was getting ready to take off the mower (wasn't in there when I got off). The button parts or what ever must be in a field somewhere. Anyway after fighting to get the orc off the tractor (the pin didn't come out without help, I was left with the woods mover pto shaft stuck in the orc. I can get the pto shaft to move a little (half an inch, back and forth with the hammer and spud wrench) in the orc a little, but would there be a little piece in there so that the pto shaft wouldn't come out? I already waked it with a hammer and spud wrench. Heat I wouldn't be sure or did I kill it (I doubt that very much)?