Round baler 545 problem

Anonymous-0

Well-known Member
Hello!

My round baler 545 not understand when ball is ready. And my husband make a force if ball is full (nr5)

Thanks.

Sry my english.
 
Check to see if the spool on the hyd valve(parts key #9) is shifting to the "twine apply" mode when tail gate is closed, I've seen the spool get dirty causing it not to shift plus hay/chaff build up not allowing it to shift. Are ALL 5 springs intact and attached correctly??????
mvphoto18984.gif
 
Aitah! (Thanks!)

I forget mention before. Baler make ball and not
started stringing. We want smaller ball, husband
regualted machine, but ball is same. Then he make
started stringing manually. I named this action
machine not understand, when ball is ready
 
(quoted from post at 01:55:37 07/09/13) Problem?

No problem at all. I was just curious. I could tell from your English that you weren't from USA. I hope my information on the baler helped. If not let us know and someone will help get it going correctly.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top