Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

664 NH round baler rollers

Welcome Guest, Log in or Register
Author  [Modern View]
horseshoein4life

07-26-2010 10:58:52




Report to Moderator

Hello we are trying to change a roller on our nh 664 it is the swing arm bottom roller. we cant get to the bolt and nuts on the end tried taking the outside springs off. any info would help thanks.




[Log in to Reply]   [No Email]
kyhayman

07-26-2010 22:58:32




Report to Moderator
 Re: 664 NH round baler rollers in reply to horseshoein4life, 07-26-2010 10:58:52  
Slack the belts and pull or push the pivot rack all the way forward. That lets you access the bolts in the ends. IIRC they all have to come out to get to the bottom but Im not positive. Sometimes the bolts will come out with an impact wrench and sometimes they have to come out the hard way



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy