Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Implement Alley Discussion Forum

O'Henry bale loader

Welcome Guest, Log in or Register
Author  [Modern View]
doug buchanan

06-08-2008 09:51:05




Report to Moderator

I need parts for an O'Henry pop-up bale loader.
Anyone know where the loaders were made or where
parts would be offered. I really need a U-joint.




[Log in to Reply]   [No Email]
ArleninOr

06-08-2008 10:34:54




Report to Moderator
 Re: O'Henry bale loader in reply to doug buchanan, 06-08-2008 09:51:05  
Doug, any tractor dealer can match that joint or a good parts house. Replaced many over the years.



[Log in to Reply]  [No Email]
doug buchanan

06-11-2008 19:12:46




Report to Moderator
 Re: O'Henry bale loader in reply to ArleninOr, 06-08-2008 10:34:54  
I have already tried 3 sources of u-joints and
everyone just shakes their head. The problem is
the shafts are 11/8" and the joints are very very
small. I can not use anything bigger because of
the space is too short between the two bearings on each side. The u-joints really appear to be
something on the line of a steering joint with
large shafts. These were not bored out either because the key ways are still there but not used
in this application.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy