John Deere 95 (need some parts)

dself3400 · Dec 27, 2021

Good afternoon forum members Im brand new to the site but have just acquired a JD 95 (gas 303 engine) combine. I got it running after storage from about 12-15 years & cleaned it out and now can throw it in thrashing gear. It runs surprisingly smooth, but I am missing some needed parts

Anyone know where some scrap ones are I might inquire about?

I need the following:
1. Radiator, screen & shroud
2. Air Precleaner Assembly
3. Operators platform folding steps
4. Header parts to make the bell crank sickle operate (missing the tie rod, eccentric gear, chain etc (previous owner tried taking the header platform off and got rid of the parts or lost them

I have added some pictures I believe this is a 1967 year model

Thanks, dself3400

centash · Dec 27, 2021

Where are you located? I know of a complete JD 95 EB with grain head and 3 row corn head that's for sale....mid western Ontario, Canada

Ben

tomstractorsandtoys · Dec 28, 2021

You need to post your location. I would have much of what you need and know of some other places in Iowa and MN that would have them as well. I am gathering parts to do a rebuild on a 95 this winter. I changed my engine out to a 329 diesel. At the price of parts you might be better off to find a better machine that is field ready than getting that one going. With some searching there are good machines to be had for $2500 or less. Post back and we will gladly help in any way we can. Here is a pic of my 95 in soybeans. Also have a 105. Tom

dself3400 · Dec 28, 2021

Im in McKinney, Texas

dself3400 · Dec 28, 2021

McKinney,Texas

Farmalldude45 · Dec 28, 2021

Friend has one in SW Oklahoma. You could buy the whole thing for the right money, I think.

dself3400 · Dec 28, 2021

Thank you Farmalldude45 How would I get in touch with him?
I found my platform steps in NE, their shipping them to me.
Thanks, dself3400

dself3400 · Jan 9, 2022

Well I appreciate everyones replys to my original post for John Deere 95 (need some parts)
I wound up getting a platform header with all the drive parts I needed. I will probably just use the entire header even though it is 2 ft shorter than mine It seems to be in pretty good shape all except one cast iron belt drive sheave located at the front left side of the feeder house that drives the long drive shaft that extends to the left side of the platform header (mine is broken).
If anyone has one, please let me know, as this is now the only drive component I need
I have now got my ol JD 95 running pretty well and actually am considering putting in a small acreage wheat crop this fall I will be experimenting this year with trying out my luck with the old 95 if I have good luck and can get it ready by then I am being optimistic I like this older antique farm equipment and appreciate the kind of workmanship they were built with and the good job they did back in the day
Thanks for the replys out there and everyone with the same interest and knowledge on this forum!
Sincerely,
dself3400

David from Kansas · Jan 10, 2022

Had a very similar machine. Think it was a 1968 model. Was hydro drive 19' grain header and had the large 23.1X26 drive tires. Was a great machine. Sold it to a fella in the Alva, OK area about 20 years ago who said he was going to harvest sunflowers with it. Would have liked to keep it but didn't have shed room and didn't want to let it set outside. Have a couple of good ground drive V-belts in the shed but nothing else I can think of.

dself3400 · Jan 12, 2022

Well Tom, Good morning
I wound up buying an entire header (14ft) for my ol JD 95 combine to get all the drive parts I needed, however, the lower cast pulley sheave at the left side of the feeder house is broken
Would you have one of these I could purchase possibly
See pics attached.
Advise
Thanks,dself3400
McKinney,TX

John Deere 95 (need some parts)

dself3400

New User

centash

Well-known Member

tomstractorsandtoys

Well-known Member

dself3400

New User

dself3400

New User

Farmalldude45

Member

dself3400

New User

dself3400

New User

David from Kansas

Well-known Member

dself3400

New User

Similar threads