cih 1660 header reel fore and aft no power to switch

MARK ROBKE

Well-known Member
My bil's 1660 has no power to the fore and aft switch for the header. We traced the red/white stripe wire from the switch to the relay but ran out of time. It's 5 wire double throw switch, so the center two terminals should have power on them, but neither wire did. Every fuse had power and tested good. We ran out of daylight and time last night to go any further. So I'm looking for a diagram I can print off or info about that circuit. Thanks, Mark.
 

here
mvphoto62376.png
 
Yeah-it is blury. Thanks for the effort, though. I think my bil may have it figured
out. Going back there Monday. Mark.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top