L630 Gleaner corn Head

2twelvepacks · Nov 17, 2019

Would a L630 corn head fit.on a N6 or N7 Gleaner?

JMS/.MN · Nov 17, 2019

Would have to check the book for the head, but pretty sure. But you need the correct mtg pkg- may be hard to find & spendy.

kenny kabat · Nov 18, 2019

I have a 6 row head from an r50 that burned. I think r and n took the same hook ups

paul · Nov 18, 2019

Don?t the rotaries have offset throat openings and the conventional are centered?

So the basic head might be the same, but there are different packages of mounting and sheet metal to fit the different machines?

Might be harder to find the mounting/ sheetmetal package than to find the actual proper configured head these days?

I have not been around the rotaries so I might be speaking out of turn........

MattLF9 · Nov 19, 2019

1983 mounts and after are universal fit on the rotary machines.

GM Guy · Feb 26, 2020

It will not fit without alot of modification. There is a Bish plate out there, but the drives will still need adapted I believe.

For a rotary, especially the class 7, I would recommend the hugger.

Any 1982 and up Gleaner rotor machine will hook up to the Hugger cornheads, and if its a 81 and older a newer feederhouse will bolt right on.

L630 Gleaner corn Head

2twelvepacks

Member

JMS/.MN

Well-known Member

kenny kabat

Member

paul

Well-known Member

MattLF9

Member

GM Guy

Member

Similar threads