Display panel on JD9500

Not getting all warning lights working on display (The right column which is supposed to light up when the thresher is engaged and not having engine at full speed) is not coming on. Had tech out but he hasn't found problem. Don't know if it is bad connecting, cable or display board. This is frustrating because tech can not figure this one.
 
Isn't that just the most frustrating thing? My Cat tractor would not start. Spin over till the cows come home but no start. They send a service tech out. He spends 3 hours with his lap top connected to every thing. Tracking down the codes, calling the dealer help line was on phone with him for hour. No start. Goes home for the day. Comes next day at 9:00 am. Finally after several hours determines it is the modulator control for tractor. Takes it off, sends it in. wk. later and $1700 he comes out and reinstall it. No start. He then goes back to shop, they will have to send truck out and load it up and take to their shop. While waiting for truck, just for the heck of it I run a jumper wire to electric fuel shut off. Thing pops right off. I call them and they send guy out with new shut off valve. He installs the $30 part in 5 minutes. Away we go.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top