|
| |
| Combines & Harvesters Discussion Forum |
pods
| Author |
[Modern View] |
|
stonerock
01-10-2019 05:34:39
|
9600 with 25' head hoe do I get the pods out of ben, there is just a lot of trash in ben settings are 450 cyl speed, 3 on the concave, fan 1050 wide open,sives front one shut, back are 3/8 and 5/8
|
|
|
|
Dugger
01-10-2019 19:50:28
|
|
Re: pods in reply to stonerock, 01-10-2019 05:34:39
|
|
| |
If you have your sieves closed the air can’t get thru
Top on 12
Bottom on 7
|
|
|
|
4520bw
01-10-2019 16:10:45
|
|
Re: pods in reply to stonerock, 01-10-2019 05:34:39
|
|
| |
When we ran a 96 with a 30' head we had to keep our ground speed up to keep cylinder full to thrash the beans.( should say in short beans) Might try to close the sieve a little more to send some more up the return. Beans this year seemed hard to get the pods out. The best luck I had was using the old 7720 with the hard surfaced trimpe bars and closing the bottom seivr all the way.
|
|
|
|
Uncle Du
01-10-2019 09:17:02
|
|
Re: pods in reply to stonerock, 01-10-2019 05:34:39
|
|
| |
I run a 9610 not sure if this will help mess with the concave that seems pretty tight open it up little by little to see if that cleans it up.
Slow the cylinder down also in small increments to not less than around 350
I think you are grinding everything up and overloading the sieves with trash.
The straw this time of year if dry or frozen will basically explode and disintegrate as it moves through the machine.
Just my thoughts.
|
|
|
|
Uncle Du
01-10-2019 06:32:11
|
|
Re: pods in reply to stonerock, 01-10-2019 05:34:39
|
|
| |
I run a 9610 not sure if this will help mess with the concave that seems pretty tight open it up little by little to see if that cleans it up.
Slow the cylinder down also in small increments to not less than around 350
I think you are grinding everything up and overloading the sieves with trash.
The straw this time of year if dry or frozen will basically explode and disintegrate as it moves through the machine.
Just my thoughts.
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
| Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ] |
Home
| Forums
Copyright © 1997-2018 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
