Kohler k161 starts but when throttled up
governor opens up like it needs fuel and
dies after 30 seconds. I've replaced all
filters, fuel lines, carburetor, sparkplug
and gaskets. Points, condenser, magneto and
wiring were replaced two years ago but i
only run it a few hours a year. It runs
best with idle screw 1 1/2 turn out and
main jet 2 turns out. If the
points/condenser went out already could it
cause this?
governor opens up like it needs fuel and
dies after 30 seconds. I've replaced all
filters, fuel lines, carburetor, sparkplug
and gaskets. Points, condenser, magneto and
wiring were replaced two years ago but i
only run it a few hours a year. It runs
best with idle screw 1 1/2 turn out and
main jet 2 turns out. If the
points/condenser went out already could it
cause this?